.. Uhdas_Computer documentation master file, created by sphinx-quickstart on Wed Jan  7 12:51:15 2009.
   You can adapt this file completely to your liking, but it should at least
   contain the root `toctree` directive.

HOWTOs
---------------------------------------------------------------------

Contents:

.. toctree::
   :maxdepth: 1


   HOWTO talk to the ADCP (tk_terminal.py) <tk_terminal>
   HOWTO do a transducer angle calibration <Calibration>
   HOWTO temporarily stop email from going out <stopping_email>
   HOWTO temporarily remove one ADCP from the mix (eg sending it in for repair) <temporarily_securing_one_adcp>
   HOWTO convert UHDAS dates <convert_uhdas_dates>
   HOWTO use only 3 beams if one is bad <three-beams>