CODAS+UHDAS Documentation


Previous topic

ADCP Data Quality: Calibration

Next topic

UHDAS serial port access (gui)

This Page


If for some reason the figures quit updating, check the panels and make sure everything is green and active. If they are, DON’T ADJUST ANYTHING: the raw data are being logged, but the processing software hit a glitch for some reason. The ADCP Operator may start data acquisition again under a new cruise name (eg. adding a letter to the cruise name) in an attempt to re-initialize the processing, but if this still does not revive the figures after several hours, email us and we will try to help.