.. UHDAS+CODAS documentation master file, created by sphinx-quickstart on Wed Jan  7 14:24:39 2009.
   You can adapt this file completely to your liking, but it should at least
   contain the root `toctree` directive.

Electrical noise (deep biases)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^


This is really bad.  This may indicates an acoustic or electrical
source of bad "signal", ie. the ADCP erroneously identifies it as
good; but it is not.  Suggestions: run the instrument self-test, get in
touch with RDI Field Service.  It is difficult to troubleshoot this kind 
of problem.


Another way to look at "bad data" is by noting where a failure in the 
ADCP components can occur.



.. toctree::
   :maxdepth: 2

.. image:: kn195_03_kn2009_025_14400.png
   :alt: ADCP data: electric noise (spurious signal)
   :scale: 50
 
 
----
 
.. image:: kn195_03_kn2009_027_14400.png
   :alt: ADCP data: electric noise (spurious signal)
   :scale: 50
 
 
----
 
.. image:: kn195_04_kn2009_074_00000.png
   :alt: ADCP data: electric noise (spurious signal)
   :scale: 50
 
 
----
 
.. image:: os75bb_electricnoise.png
   :alt: ADCP data: electric noise (spurious signal)
   :scale: 50
 
 
----
 
.. image:: os75nb_electricnoise.png
   :alt: ADCP data: electric noise (spurious signal)
   :scale: 50