.. ......................................
.. UHDAS/CODAS restructured text document
.. ......................................

.. _tools_used:


Tools Used in Demos
---------------------------


The following pages had links to them in this section.  They provide more detail about:


**tools used to calibrate or correct datasets:**

  - :ref:`patch_hcorr.py, to interpolate heading corrections if necessary<patch_hcorr>`
  - :ref:`transducer angle calibration ("phase")<phase>`
  - :ref:`scale factor (sometimes called "amplitude")<amplitude>`
  - :ref:`horizontal offset between ADCP and GPS<xducer_dxdy>`

**using dataviewer.py in edit mode**:

  - :ref:`how to recognize underway_bias<underway_bias>`
  - :ref:`an obsolete editing threshold called "jitter"<jitter-cutoff>`

**important commandline tools**:

  - :ref:`quick_adcp.py, which underlies all CODAS processing<quickadcp_overview>`
  - :ref:`quick_web.py, to make a web page with velocity sections<quick_web>`

**less-used commandline tools**:

  - :ref:`how to surgically excise profile flags from the ascii files<manual_undo_editing>`


**PINGDATA processing**

  - :ref:`PINGDATA processing<pingdata_note>`

(Skip to the next section: :ref:`UHDAS_OPERATIONS<uhdas_operations>`


.. toctree::
  :hidden:

  patch_hcorr
  dataviewer/phase
  dataviewer/amplitude
  dataviewer/xducer_dxdy
  dataviewer/underway_bias
  dataviewer/jitter_cutoff
  quickadcp_overview
  quick_web/index
  dataviewer/manual_undo_editing
  pingdata_note