.. _special_processing_index:


Special Processing Situations
-------------------------------


- I have an old UHDAS cruise which used matlab for the processing. I'm getting errors
  when I try to postprocess it.  Is there a solution?
  :ref:`Yes, see these instructions <older_cruises>`

- How do I process an Ocean Surveyor cruise that has some chunks of broadband and
  some chunks of narrowband data?   :ref:`Try these instructions <mixed_pings>`.

- I have a UHDAS+CODAS Python processing directory with a high-frequency
  instrument, in shallow water, and almost no bottom track points are
  avaliable.  How do I increase the number of bottom track points?
  :ref:`Try these instructions <add_btpoints>`.

- I have a UHDAS+CODAS Python processing directory with lots of short,
  straight segments, surveying a small feature at slow speeds.  How
  can I increase the number of watertrack points?
  :ref:`Try these instructions <add_wtpoints>`.

- I have a cruise with shallow parts (with bottom track points) and deep parts (with
  watertrack calibration).  How can I combine them to get a better result?
  :ref:`Try these instructions <bt_wt_calibration-angle>`.

- I am on a cruise and I want to keep up with the editing of the data every day
  so I can make nice plots.  :ref:`Here are the instructions<reuse_editing>`.

- How do I load the netCDF file into Ocean Data Viewer? :ref:`Try these instructions <ocean_data_view>`

- I need to print out a simple sheet showing scientists what UHDAS does.  Where
  can I find one?    Try downloading :download:`this pdf figure </images/UHDAS_atsea/uhdas_overview.pdf>`

- I need to regenerate rbin files.  What do I do? :ref:`Try this link <regenerate_uhdas>`

(Skip to the next section: :ref:`UHDAS_OPERATIONS<uhdas_operations>`


Direct links to these sections are provided below:

.. toctree::
  :maxdepth: 1

  older_cruise_compatibility
  mixed_pings
  add_btpoints
  add_wtpoints
  calibration/index
  reuse_editing
  adcp_nc2odv
  regenerating_uhdas