.. _example_logsheet:

Example Logsheet
==================
::
  
  
  CRUISE, INSTRUMENT (serial number), SOB (serial number)
  
    Station _______   Lat ________________  Lon __________________   
                                                                          
      Cast _________ Julian Day  ______, _____/______/______  (yyyy/mm/dd) 
  ........................................................................
  DEPLOY:                                                                 
  
  *   Power Supply status    ON ______  or OFF _______
  *   Set sta_cast name      [Y / N] (gui: upper right corner: SSS_CC)
  c   Check PC clock time    [Y / N] (command line: "date")          
  *   Initialize             [Y / N] (gui: Deploy: Deployment Initialization)
  *   Set clock              [Y / N] (gui: Deploy: Set Clock)          
                                                                          
        _____ #deployments recorded, _____MB used                         
                                                                          
  *  Erase recorder?         [Y / N] (gui: Command: Erase Recorder NOW)  
  *  Start deployment        [Y / N] (gui: Deploy: Send Setup [wh150.cmd])
  
  Deployment begun at time  ______:_______:_______Z  (i.e. begin pinging) 
                                                                          
  *   Power Supply off if on [Y / N] (toggle off at back left corner)  
  *   "disconnect" at gui    [Y / N] (gui: Deploy: Disconnect)            
  *   Is instrument pinging? [Y / N] 
  
  In the hangar:
  *   Disconnect cable, plug in dummies. secure charging cable  [Y / N]
  *   Secure LADCP cable with rope/bungies                      [Y / N]
  ........................................................................
  RECOVER:
              Bottom  Time:   maximum CTD pressure:    meters off bottom    
  
     from CTD log:    ______:______Z       __________m         ___________m  
  
  * Is the instrument still pinging?                             [Y / N]
  * in the hangar: hose off instrument and dummy, connect cable  [Y / N]
  * in the lab:    power on at power supply                      [Y / N]
                                 
  * Initialize            [Y / N] (gui: Recover: Recovery Initialization)
                                                                          
    PC Time: ______:______:______Z Julian Day (if different) _______
                                                                          
    _____ #deployments recorded, _____MB used (out of 20)             
                                                                          
  * Download              [Y / N] (gui: Recover: Download)   
    downloading file #___, Filename_____________, Time: _______:_______Z
    downloading file #___, Filename_____________, Time: _______:_______Z
    (if two files were recorded, add suffix _1 and _2)   
  
  * Run check_ladcp         [Y / N] (command line: "check_ladcp SSS_CC.dat") 
  
    zmax ___________        zend ____________
  
  * Power Supply status    ON ______  or OFF _______ 
   
  WHEN GREEN LIGHT IS ON AND FAN TURNS OFF, TURN IT OFF   
  ------------------------------------------------------------------
  NOTES: