.. troubleshooting documentation master file, created by sphinx-quickstart on Wed Jan  7 13:24:57 2009.
   You can adapt this file completely to your liking, but it should at least
   contain the root `toctree` directive.

Troubleshooting
===============

If for some reason the figures quit updating, check the panels and
make sure everything is green and active. If they are, DON'T ADJUST
ANYTHING: the raw data are being logged, but the processing software
hit a glitch for some reason. The ADCP Operator may start data
acquisition again under a new cruise name (eg. adding a letter to the
cruise name) in an attempt to re-initialize the processing, but if
this still does not revive the figures after several hours, email us
and we will try to help.

.. toctree::
   :maxdepth: 2


   Files that should be updating <TS_What_Should_Be_Updating>
   Automated Processing <repeaters>
   Interpreting Ashtech NMEA messages <ashtech_diagnostics>
   UHDAS serial communication tool <tk_terminal>
   Calibrating a new ADCP <Calibration/btcaluv>
   Hopelessly Confused message <TS_Hopelessly_Confused>
   Gui is Hung?  <TS_StrangeState>
   Installation: checklist <install>