LAST CHANGED    : 2014/12/19 20:26:31
CRUISE NAME(S)  : FK141215
CRUISE DATES    : 2014/12/15 to 2014/12/15 
SHIP NAME       : Falkor
PORTS           : Apra Harbor, Guam to Apra Harbor, Guam
CHIEF SCIENTIST : D.Bartlett
DATABASE NAME   : a_fk
DATA FILES      : fk2014_348_76703.raw to fk2014_352_72000.raw

STATUS          :  to do                           done
                  ------                       -----------
                  averaged                       [ at sea    ]
                  loaded                         [ at sea    ]

                  NOTE: heading correction instrument exists
                        NOTE: time-dependent heading corrections
                        applied IN the ensembles
                        (see   cal/rotate/ens_hcorr.ang)

                  check heading correction       [  y   ]
                  calibration                    [  y   ]
                  edited                         [  y   ]
                  re-check heading correction    [  y   ]
                  check editing                  [  y   ]
                  figures                        [  y   ]

INSTRUMENT      : os75

ACQUISITION     :
     PROGRAM    : uhdas
     PROCESSING:    : python

LOGGING         :

     PARAMETERS : BT : bottom track mode (on or off)
                  SI : sampling interval or averaging period for ensemble (sec)
                  NB : number of bins
                  BL : bin length (m)
                  TD : transducer depth (m)
                  BK : blanking length (m)
                  HO : heading offset applied by DAS (deg)
                  HB : heading bias (deg)
                  CRPH : compensation for roll-pitch-heading, 1:on, 0:off)

                  yy/mm/dd  hh:mm:ss   BT   SI  NB  BL  TD BK     HO     HB CRPH
                  2014/12/15 21:23:24  off  300  60  16   7  8  59.40   0.00 0001

HEADING         :
     PRIMARY    : heading from gyro
     CORRECTION : heading correction from seapath
                        NOTE: time-dependent heading corrections
                        applied IN the ensembles
                        (see   cal/rotate/ens_hcorr.ang)

POSITIONS       : gps positions from cnav

CALIBRATION     : original transducer orientation: 59.40
                  transducer depth: 7.0
                  (check original processing parameters)
                  additional rotation 0
                  final transducer angle is:
                       (original transducer angle) - (rotate_angle)
                  applied scale factor 1
                  additional scale factor (1.003)

COMMENTS        : very little data

PROCESSOR       : J.Hummon


--- processing parameters ----------


## (determined from "sonar"): model = os
## (determined from "sonar"): frequency = 75
## (determined from "sonar"): pingtype = nb
## (determined from "sonar"): instname = os75
           beamangle   30
          cruisename   FK141215
            datatype   uhdas
             ens_len   300
             fixfile   a_fk.gps
           frequency   75
          hcorr_inst   seapath
            instname   os75
               model   os
            pingtype   nb
         proc_engine   python
          ref_method   refsm
     refuv_smoothwin   3
        refuv_source   nav
               sonar   os75nb
            txy_file   a_fk.agt
           xducer_dx   0
           xducer_dy   21
            yearbase   2014


#--------------------------------------------

(1) copy at-sea processing directory

(2) look for gaps in Seapath (none)

(3) editing

cd edit
gautoedit.py
cd ..


quick_adcp.py --steps2rerun apply_edit:navsteps:calib --auto


(4) determine calibration -- use values from ajoining cruises

quick_adcp.py --steps2rerun navsteps:rotate:calib --rotate_amplitude 1.003 --auto



(5) look at data again to see if it looks OK (more editing needed?)

    - run this:

    dataviewer.py


(6) make web plots

    mkdir webpy
    cp ../os75bb/webpy/sectinfo.txt webpy
    quick_web.py --redo


    - view with a browser, look at webpy/index.html


(8) extract data

    adcp_nc.py adcpdb  contour/os75nbFK141215 os75nb
    quick_adcp.py --steps2rerun matfiles --auto