LAST CHANGED : 2017/09/27 20:39:39 CRUISE NAME(S) : FK170825 CRUISE DATES : 2017/08/27 to 2017/09/27 SHIP NAME : Falkor PORTS : Honolulu, Palmyra Atol, Honolulu CHIEF SCIENTIST : K. Rubin DATABASE NAME : a_fk DATA FILES : fk2017_238_75730.raw to fk2017_269_72000.raw STATUS : to do done ------ ----------- averaged [ x ] loaded [ x ] NOTE: heading correction instrument exists NOTE: time-dependent heading corrections applied IN the ensembles (see cal/rotate/ens_hcorr.ang) check heading correction [ x ] calibration [ x ] edited [ x ] re-check heading correction [ x ] check editing [ x ] figures [ x ] INSTRUMENT : wh300 ACQUISITION : PROGRAM : uhdas PROCESSING: : python LOGGING : PARAMETERS : BT : bottom track mode (on or off) SI : sampling interval or averaging period for ensemble (sec) NB : number of bins BL : bin length (m) TD : transducer depth (m) BK : blanking length (m) HO : heading offset applied by DAS (deg) HB : heading bias (deg) CRPH : compensation for roll-pitch-heading, 1:on, 0:off) yy/mm/dd hh:mm:ss BT SI NB BL TD BK HO HB CRPH 2017/08/27 21:04:12 on 120 70 2 7 2 44.63 0.00 0001 2017/08/28 11:33:47 off 120 70 2 7 2 44.63 0.00 0001 2017/09/11 22:31:03 off 120 70 2 7 2 44.63 0.00 0001 2017/09/14 00:47:38 on 120 70 2 7 2 44.63 0.00 0001 2017/09/14 17:39:02 off 120 70 2 7 2 44.63 0.00 0001 2017/09/21 06:50:20 on 120 70 2 7 2 44.63 0.00 0001 2017/09/22 03:20:12 off 120 70 2 7 2 44.63 0.00 0001 2017/09/26 16:53:25 off 120 70 2 7 2 44.63 0.00 0001 2017/09/27 11:41:50 off 120 70 2 7 2 44.63 0.00 0001 HEADING : PRIMARY : heading from gyro CORRECTION : heading correction from seapath NOTE: time-dependent heading corrections applied IN the ensembles (see cal/rotate/ens_hcorr.ang) POSITIONS : gps positions from cnav CALIBRATION : (check original processing parameters) additional rotation -0.085 final transducer angle is: (original transducer angle) - (rotate_angle) 44.63 - (-0.085) = 44.55 applied scale factor 1.007 additional scale factor (none) GPS x sonar offset: Original processing was done with settings left over from the earlier wh300-on-a-pole: xducer_dx = 21, xducer_dy = 0 These are emperically corrected by xducer_dx -19, xducer_dy 18 Actual offsets are more like xducer_dx = 2 xducer_dy = 18 COMMENTS : No gaps in heading correction PROCESSOR : U. Pinho --- processing parameters ---------- ## (determined from "sonar"): model = wh ## (determined from "sonar"): frequency = 300 ## (determined from "sonar"): instname = wh300 ## (determined from "sonar"): pingtype = bb beamangle 20 cruisename FK170825 datatype uhdas ens_len 120 fixfile a_fk.gps frequency 300 hcorr_inst seapath instname wh300 model wh pingtype bb proc_engine python ref_method refsm refuv_smoothwin 3 refuv_source nav sonar wh300 txy_file a_fk.agt xducer_dx 21 xducer_dy 0 yearbase 2017 # POST-PROCESSING ------- (1) Cruise overview: cd wh300 plot_nav.py nav/a_fk.gps Cruise from Honolulu to Palmyra Atoll and back to Honolulu. (2) review the data (a) check calibration:heading correction device: figview.py cal/rotate/*png conclude: no action needed figview.py . (b) check calibration: **watertrack** ------------ Number of edited points: 35 out of 47 amp = 1.0133 + 0.0006 (t - 251.7) phase = -0.30 + -0.0049 (t - 251.7) median mean std amplitude 1.0110 1.0133 0.0162 phase -0.2590 -0.2993 0.8417 ------------ **bottomtrack** ------------ unedited: 296 points edited: 0 points, 2.0 min speed, 2.5 max dev median mean std amplitude inf nan -0.0000 phase inf nan -0.0000 ------------ **transducer-gps offset** ------------ guessing ADCP (dx=starboard, dy=fwd) meters from GPS positions from a_fk.agt calculation done at 2017/09/27 20:39:38 xducer_dx = -19.225087 xducer_dy = 18.387215 signal = 1198.286214 ------------ quick_adcp.py --steps2rerun rotate:apply_edit:navsteps:calib --xducer_dx -19 --xducer_dy 18 --auto **watertrack** ------------ Number of edited points: 37 out of 47 amp = 1.0052 + 0.0004 (t - 251.6) phase = -0.12 + -0.0081 (t - 251.6) median mean std amplitude 1.0070 1.0052 0.0109 phase -0.0840 -0.1234 0.5497 ------------ **transducer-gps offset** ------------ guessing ADCP (dx=starboard, dy=fwd) meters from GPS positions from a_fk.agt calculation done at 2018/02/15 00:23:53 xducer_dx = -0.758646 xducer_dy = 0.471666 signal = 1198.286214 ------------ (3) edit "gautoedit" cd edit gautoedit.py -n5 # apply editing: cd .. quick_adcp.py --steps2rerun apply_edit:navsteps:calib --auto # check editing -- looks OK dataviewer.py (4) - check calibrations again **transducer-gps offset** ------------ guessing ADCP (dx=starboard, dy=fwd) meters from GPS positions from a_fk.agt calculation done at 2018/02/15 01:00:05 xducer_dx = -0.803360 xducer_dy = 0.560166 signal = 1198.286214 ------------ **watertrack** ------------ Number of edited points: 36 out of 44 amp = 1.0046 + 0.0003 (t - 251.3) phase = -0.13 + -0.0086 (t - 251.3) median mean std amplitude 1.0065 1.0046 0.0104 phase -0.0850 -0.1269 0.5571 ------------ quick_adcp.py --steps2rerun rotate:apply_edit:navsteps:calib --rotate_angle -0.085 --auto **watertrack** ------------ Number of edited points: 36 out of 44 amp = 1.0048 + 0.0003 (t - 251.3) phase = 0.01 + -0.0046 (t - 251.3) median mean std amplitude 1.0070 1.0048 0.0103 phase 0.0010 0.0098 0.4317 ------------ quick_adcp.py --steps2rerun rotate:navsteps:calib --rotate_amplitude 1.007 --auto ------------ Number of edited points: 36 out of 44 amp = 0.9978 + 0.0003 (t - 251.3) phase = 0.01 + -0.0042 (t - 251.3) median mean std amplitude 1.0000 0.9978 0.0103 phase -0.0025 0.0116 0.4337 ------------ figview.py cal/watertrk/wtcal1.png (5) make web plots quick_web.py --interactive - view with a browser, look at webpy/index.html (6) Extract data: quick_adcp.py --steps2rerun matfiles --auto You can extract NetCDF files as well. adcp_nc.py adcpdb contour/wh300_short FK170825 wh300 adcp_nc.py --long adcpdb contour/wh300_long FK170825 wh300 To check netcdf file: ncdump -h contour/wh300_short.nc # cat cruise_info.txt at the top of this file!