LAST CHANGED : 2018/04/20 23:37:54 CRUISE NAME(S) : kok1801, hot301 CRUISE DATES : 2018/04/16 to 2018/04/20 SHIP NAME : Ka'imikai-o-Kanaloa PORTS : Honolulu, HI to Honolulu, HI CHIEF SCIENTIST : Dan Sadler DATABASE NAME : a_kk DATA FILES : kk2018_105_63235.raw to kk2018_109_79200.raw STATUS : to do done ------ ----------- averaged [ x ] loaded [ x ] NOTE: heading correction instrument exists NOTE: time-dependent heading corrections applied IN the ensembles (see cal/rotate/ens_hcorr.ang) check heading correction [ x ] calibration [ x ] edited [ x ] re-check heading correction [ x ] check editing [ x ] figures [ x ] INSTRUMENT : wh300 ACQUISITION : PROGRAM : uhdas PROCESSING: : python LOGGING : PARAMETERS : BT : bottom track mode (on or off) SI : sampling interval or averaging period for ensemble (sec) NB : number of bins BL : bin length (m) TD : transducer depth (m) BK : blanking length (m) HO : heading offset applied by DAS (deg) HB : heading bias (deg) CRPH : compensation for roll-pitch-heading, 1:on, 0:off) yy/mm/dd hh:mm:ss BT SI NB BL TD BK HO HB CRPH 2018/04/16 17:38:40 off 120 30 4 4 4 -9.40 0.00 0001 2018/04/17 13:38:40 off 120 30 4 4 4 -9.40 0.00 0001 2018/04/20 00:12:27 off 120 30 4 4 4 -9.40 0.00 0001 HEADING : PRIMARY : heading from gyro CORRECTION : heading correction from mahrs NOTE: time-dependent heading corrections applied IN the ensembles (see cal/rotate/ens_hcorr.ang) POSITIONS : gps positions from gpsnav CALIBRATION : (check original processing parameters) additional rotation 0 final transducer angle is: (original transducer angle) - (rotate_angle) applied scale factor 1 additional scale factor (none) COMMENTS : gaps in heading correction? scattering layers? bubbles? underway bias? PROCESSOR : K.C. Rosburg --- processing parameters ---------- ## (determined from "sonar"): model = wh ## (determined from "sonar"): frequency = 300 ## (determined from "sonar"): instname = wh300 ## (determined from "sonar"): pingtype = bb beamangle 20 cruisename kok1801 datatype uhdas ens_len 120 fixfile a_kk.gps frequency 300 hcorr_inst mahrs instname wh300 model wh pingtype bb proc_engine python ref_method refsm refuv_smoothwin 3 refuv_source nav sonar wh300 txy_file a_kk.gps xducer_dx 0 xducer_dy 0 yearbase 2018 (unless otherwise stated, comments are relative to root processing directory) haupia:(wh300)$ =================================== this is a linux machine; use little-endian database (remove all other databases) (0) remake all the plots quick_mplplots.py --plots2run all --yearbase 2018 (1) look at heading correction: are there gaps? figview.py cal/rotate/*png This was a KOK cruise, so no heading corrections. (2) see what calibration looks like: amp in [0.995, 1.005] : good enough to proceed to the next step. tweak later phase in (-.5, .5) : good enough to proceed to the next step. tweak later rule of thumb: errors when underway: scale factor of 1.02 (i.e. 2%) gives 10cm/s alongtrack error phase error of 1deg gives 10cm crosstrack error (goal is 1cm/s) tail -20 cal/watertrk/adcpcal.out ** watertrack ** (HOT-301) Number of edited points: 4 out of 4 amp = 1.0112 + 0.0034 (t - 107.3) phase = 0.00 + 0.0243 (t - 107.3) median mean std amplitude 1.0045 1.0112 0.0145 phase 0.0105 0.0037 0.2468 nav - pc -1.5000 -0.5000 2.3805 var 0.0010 0.0013 0.0005 min var 0.0010 0.0013 0.0005 delta-u -0.2800 -0.2400 3.3801 delta-v 0.8850 0.7775 2.9814 Looks good! (3) edit: gautoedit.py .. cd edit; gautoedit.py; cd ../ from gautoedit, for every screen do - show now - additional manual editing if necessary - list to disk (creates/appends new a*.asc files with new flags) (4) apply editing from dir sonar: quick_adcp.py --steps2rerun apply_edit:navsteps:calib --proc_engine python -- datatype uhdas --auto (if you don't want to sit and hit y for all questions, add "yes | " before the commdand (no quotes)) (5) apply calibration correct to third sig fig for amplitude; second for phase if both are positive values, enter a positive correction quick_adcp.py --steps2rerun rotate:navsteps:calib:matfiles --proc_engine python --rotate_amplitude 1.004 --datatype uhdas --auto tail -20 cal/watertrk/adcpcal.out ** watertrack ** (HOT-301) Number of edited points: 4 out of 4 amp = 1.0072 + 0.0034 (t - 107.3) phase = 0.00 + 0.0221 (t - 107.3) median mean std amplitude 1.0005 1.0072 0.0145 phase 0.0115 0.0025 0.2422 nav - pc -1.0000 -0.5000 1.7321 var 0.0010 0.0013 0.0005 min var 0.0010 0.0008 0.0005 delta-u -0.2800 -0.2400 3.3801 delta-v 0.8850 0.7775 2.9814 Looks GOOD (remember to save) (6) web plots: quick_web.py --interactive cd ../ cat wh300/cruise_info.txt dm_notes_wh300.txt > wh300.txt ALL done