LAST CHANGED : 2019/09/07 17:13:52 CRUISE NAME(S) : km1917, hot315 CRUISE DATES : 2019/09/03 to 2019/09/07 15:43:26 SHIP NAME : Kilo Moana PORTS : Honolulu, HI to Honolulu, HI CHIEF SCIENTIST : T. Clemente DATABASE NAME : a_km DATA FILES : km2019_245_56299.raw to km2019_249_57600.raw STATUS : to do done ------ ----------- averaged [ x ] loaded [ x ] NOTE: heading correction instrument exists NOTE: time-dependent heading corrections applied IN the ensembles (see cal/rotate/ens_hcorr.ang) check heading correction [ x ] calibration [ x ] edited [ x ] re-check heading correction [ x ] check editing [ x ] figures [ x ] INSTRUMENT : os38 ACQUISITION : PROGRAM : uhdas PROCESSING: : python LOGGING : PARAMETERS : BT : bottom track mode (on or off) SI : sampling interval or averaging period for ensemble (sec) NB : number of bins BL : bin length (m) TD : transducer depth (m) BK : blanking length (m) HO : heading offset applied by DAS (deg) HB : heading bias (deg) CRPH : compensation for roll-pitch-heading, 1:on, 0:off) yy/mm/dd hh:mm:ss BT SI NB BL TD BK HO HB CRPH 2019/09/03 15:43:20 off 300 115 12 7 16 44.55 0.00 0001 HEADING : PRIMARY : heading from gyro CORRECTION : heading correction from posmv NOTE: time-dependent heading corrections applied IN the ensembles (see cal/rotate/ens_hcorr.ang) POSITIONS : gps positions from posmv CALIBRATION : (check original processing parameters) additional rotation -0.0735 final transducer angle is: (original transducer angle) - (rotate_angle) 44.55 - -0.0735 = 44.6235 applied scale factor 1.0035 additional scale factor (none) COMMENTS : gaps in heading correction? Yes, on station at Kaena. scattering layers? Visible in signal return, not in data. bubbles? No. underway bias? No. PROCESSOR : T. Rohrer --- processing parameters ---------- ## (determined from "sonar"): model = os ## (determined from "sonar"): frequency = 38 ## (determined from "sonar"): instname = os38 ## (determined from "sonar"): pingtype = bb beamangle 30 cruisename km1917 datatype uhdas ens_len 300 fixfile a_km.gps frequency 38 hcorr_inst posmv instname os38 model os pingtype bb proc_engine python ref_method refsm refuv_smoothwin 3 refuv_source nav sonar os38bb txy_file a_km.agt xducer_dx 16 xducer_dy 6 yearbase 2019 (unless otherwise stated, comments are relative to root processing directory) codaspy:(os38bb)$ =================================== (0) remake all the plots quick_mplplots.py --plots2run all --yearbase 2019 (1) look at heading correction: are there gaps? figview.py cal/rotate/*png [] There were no gaps! [X] There WERE some gaps! Two small gaps. Running patch_hcorr_app.py ---Original Calibration--- - Water Track Calibration: median mean std amplitude 1.0030 1.0001 0.0115 phase -0.0940 -0.0625 0.7161 ---New Calibration--- - Water Track Calibration: median mean std amplitude 1.0035 1.0013 0.0096 phase -0.0735 0.0052 0.5911 Applied heading correction: quick_adcp.py --steps2rerun rotate:apply_edit:navsteps:calib --rotate_amplitude 1.0035 --rotate_angle -0.0735 --auto (2) see what calibration looks like: amp in [0.995, 1.005] : good enough to proceed to the next step. tweak later phase in (-.5, .5) : good enough to proceed to the next step. tweak later rule of thumb: errors when underway: scale factor of 1.02 (i.e. 2%) gives 10cm/s alongtrack error phase error of 1deg gives 10cm crosstrack error (goal is 1cm/s) tail -20 cal/watertrk/adcpcal.out ** watertrack** (HOT-315) Number of edited points: 36 out of 38 amp = 0.9978 + 0.0005 (t - 247.8) phase = 0.08 + -0.1335 (t - 247.8) median mean std amplitude 1.0000 0.9978 0.0094 phase 0.0005 0.0811 0.5959 nav - pc 0.0000 -0.1389 1.5147 var 0.0010 0.0013 0.0007 min var 0.0010 0.0013 0.0008 delta-u 1.1750 0.4875 3.9073 delta-v -0.0100 -0.1031 3.5720 Looking good. (3) gautoedit.py (4) apply editing quick_adcp.py --steps2rerun apply_edit:navsteps:calib --proc_engine python --datatype uhdas --auto (5) rechecking calibration tail -20 cal/watertrk/adcpcal.out ** watertrack ** (HOT-315, after edits) Number of edited points: 36 out of 37 amp = 0.9978 + 0.0005 (t - 247.8) phase = 0.08 + -0.1335 (t - 247.8) median mean std amplitude 1.0000 0.9978 0.0094 phase 0.0005 0.0811 0.5959 nav - pc 0.0000 -0.1389 1.5147 var 0.0010 0.0013 0.0007 min var 0.0010 0.0013 0.0008 delta-u 1.1750 0.4875 3.9073 delta-v -0.0100 -0.1031 3.5720 Leaving it as is. (6) web plots (make sure to save this file now): Making web plots. mkdir webpy cp ../wh300/webpy/sectinfo.txt webpy/ quick_web.py --redo cd ../ cat os38bb/cruise_info.txt dm_notes_os38bb.txt > os38bb.txt ALL done