LAST CHANGED : 2021/11/02 17:09:51 CRUISE NAME(S) : km2116, hot333 CRUISE DATES : 2021/10/27 to 2021/11/2 SHIP NAME : Kilo Moana PORTS : Honolulu, HI to Honolulu, HI CHIEF SCIENTIST : Karin Björkman DATABASE NAME : a_km DATA FILES : km2021_299_74961.raw to km2021_305_57600.raw STATUS : to do done ------ ----------- averaged [ x ] loaded [ x ] NOTE: heading correction instrument exists NOTE: time-dependent heading corrections applied IN the ensembles (see cal/rotate/ens_hcorr.ang) check heading correction [ x ] calibration [ x ] edited [ x ] re-check heading correction [ x ] check editing [ x ] figures [ x ] INSTRUMENT : os38 ACQUISITION : PROGRAM : uhdas PROCESSING: : python LOGGING : PARAMETERS : BT : bottom track mode (on or off) SI : sampling interval or averaging period for ensemble (sec) NB : number of bins BL : bin length (m) TD : transducer depth (m) BK : blanking length (m) HO : heading offset applied by DAS (deg) HB : heading bias (deg) CRPH : compensation for roll-pitch-heading, 1:on, 0:off) yy/mm/dd hh:mm:ss BT SI NB BL TD BK HO HB CRPH 2021/10/27 20:54:22 off 300 115 12 7 16 44.55 0.00 0001 2021/10/28 21:54:23 off 300 115 12 7 16 44.55 0.00 0001 2021/10/30 23:54:25 off 300 115 12 7 16 44.55 0.00 0001 2021/11/01 00:54:27 off 300 115 12 7 16 44.55 0.00 0001 HEADING : PRIMARY : heading from gyro CORRECTION : heading correction from posmv NOTE: time-dependent heading corrections applied IN the ensembles (see cal/rotate/ens_hcorr.ang) POSITIONS : gps positions from posmv CALIBRATION : (check original processing parameters) additional rotation -0.088 final transducer angle is: (original transducer angle) - (rotate_angle) 44.55- (-0.088) = 44.638 applied scale factor 1.002 additional scale factor (none) COMMENTS : gaps in heading correction? One small set scattering layers? Not bad bubbles? Not bad underway bias? Minimal PROCESSOR : T. Rohrer --- processing parameters ---------- ## (determined from "sonar"): model = os ## (determined from "sonar"): frequency = 38 ## (determined from "sonar"): instname = os38 ## (determined from "sonar"): pingtype = bb beamangle 30 cruisename km2116 datatype uhdas ens_len 300 fixfile a_km.gps frequency 38 hcorr_inst posmv instname os38 model os pingtype bb proc_engine python ref_method refsm refuv_smoothwin 3 refuv_source nav sonar os38bb txy_file a_km.agt xducer_dx 16 xducer_dy 6 yearbase 2021 (unless otherwise stated, comments are relative to root processing directory) codaspy:(os38bb)$ =================================== (0) remake all the plots quick_mplplots.py --plots2run all --yearbase 2021 (1) look at heading correction: are there gaps? figview.py cal/rotate/*png [] There were no gaps! [X] There WERE some gaps! patch_hcorr.py - Water Track Calibration: median mean std amplitude 1.0020 1.0010 0.0077 phase -0.0840 -0.0105 0.3854 ---New Calibration--- - Water Track Calibration: median mean std amplitude 1.0020 1.0012 0.0076 phase -0.0880 -0.0084 0.3878 Ran correction: quick_adcp.py --steps2rerun rotate:apply_edit:navsteps:calib --rotate_amplitude 1.002 --rotate_angle -0.088 --auto (2) see what calibration looks like: amp in [0.995, 1.005] : good enough to proceed to the next step. tweak later phase in (-.5, .5) : good enough to proceed to the next step. tweak later rule of thumb: errors when underway: scale factor of 1.02 (i.e. 2%) gives 10cm/s alongtrack error phase error of 1deg gives 10cm crosstrack error (goal is 1cm/s) tail -20 cal/watertrk/adcpcal.out Number of edited points: 49 out of 53 amp = 0.9992 + -0.0002 (t - 302.9) phase = 0.08 + -0.1083 (t - 302.9) median mean std amplitude 1.0000 0.9992 0.0074 phase -0.0030 0.0772 0.3805 nav - pc -1.0000 -1.1429 2.6458 var 0.0010 0.0008 0.0005 min var 0.0010 0.0007 0.0005 delta-u -0.0400 -0.0033 3.4501 delta-v -0.0300 -0.0800 3.4100 Continuing with editing, despite median/mean differences. (3) gautoedit.py Really good auto-editing. Removed just a few data points. (4) apply editing quick_adcp.py --steps2rerun apply_edit:navsteps:calib --proc_engine python --datatype uhdas --auto (5) rechecking calibration tail -20 cal/watertrk/adcpcal.out Number of edited points: 49 out of 52 amp = 0.9992 + -0.0002 (t - 302.9) phase = 0.08 + -0.1083 (t - 302.9) median mean std amplitude 1.0000 0.9992 0.0074 phase -0.0030 0.0772 0.3805 nav - pc -1.0000 -1.1429 2.6458 var 0.0010 0.0008 0.0005 min var 0.0010 0.0007 0.0005 delta-u -0.0400 -0.0033 3.4501 delta-v -0.0300 -0.0800 3.4100 Takin' it. (6) web plots (make sure to save this file now): Making web plots. mkdir webpy cp ../wh300/webpy/sectinfo.txt webpy/ quick_web.py --redo cd ../ cat os38bb/cruise_info.txt dm_notes_os38bb.txt > os38bb.txt ALL done